VERACRUZ(EN) >2007 > G 3.8 DOHC > Body Electrical System > Immobilizer System > Immobilizer Control Unit>Repair procedures
REMOVAL
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel(A) after removing side cover. (Refer to the Body group - "Crash pad").
3.
Disconnect the 5P connector of the SMARTRA unit and then remove the SMARTRA unit (A) after loosening a nut.
INSTALLATION
1.
Reassemble the SMARTRA unit after connecting the connector.
2.
Reassemble the driver crash pad lower panel.
