| 1. |
Remove the front wheel &
tire. |
| 2. |
Remove the split pin, bolt, and nut
(A). |
| 3. |
Disconnect the lower arm (B) ball joint with
the knuckle.
|
| 4. |
Loosen the bolts and nut (A, B) and then
remove the lower arm from the sub-frame.
|
| 1. |
Install the front lower arm to the sub-frame
and then tighten the bolts (A, B) and nuts.
Tightening
torque Nm (kgf.m, lb-ft):
140 ~ 160 (14.0 ~ 16.0, 101 ~
116)
|
|
| 2. |
Connect the lower arm (B) ball joint with
the knuckle and then tighten the bolt and nut (A).
Tightening
torque Nm (kgf.m, lb-ft):
100 ~ 120 (10.0 ~ 12.0, 72 ~
87)
| |
| 3. |
Install the split pin to the
bolt.
|
| 4. |
Install the front wheel &
tire.
Tightening
torque Nm (kgf.m, lb-ft):
90 ~ 110 (9.0 ~ 11.0, 65 ~
80)
| |
| 1. |
Check the bushing for wear and
deterioration. |
| 2. |
Check the lower arm for
deformation. |
| 3. |
Check the all bolts and
nuts. | |
