Calibration procedure
If the display read "C",
calibrate the compass.
| 1. |
Driving the vehicle in a circle at less than
8km/h 3 times or until the compass heading
appears. |
| 2. |
Driving in a circle in right-handed direction
and opposite direction are possible, and if the calibration is
completed, the compass heading will
appear. |
| 3. |
Keep driving in a circle until a commpass
heading appears. |
To adjust the Zone setting :
| 1. |
Determine the desired zone number based upon
your current location on the zone
maps. |
| 2. |
Press and hold the Feature Control button for
more than 6 but less than 9 seconds, the current zone number will
appear on the display (B). |
| 3. |
Pressing and holding the feature control
button (A) again will cause the numbers to increment (Note: they
will repeat …13, 14, 15, 1, 2,..). Releasing the button when the
desired zone number appears on the display will set the new
zone. |
| 4. |
Within about 5 seconds the compass will start
displaying a compass heading again. |
To re-calibrate the compass :
There are some
conditions that can cause changes to the vehicle magnets. Items such as
installing a ski rack or a antenna or even some body repair work on the
vehicle can cause changes to the vehicle's magnetic field. In these
situations, the compass will need to be re-calibrated to quickly correct
for these changes.
| 1. |
Press and hold the feature control button (A)
for more than 9 seconds. When the compass memory is cleared, a "C"
will appear in the display (B). |
| 2. |
To calibrate the compass, drive the vehicle is
2 complete circles at less than 8 KPH (5
MPH). |
Zone Map
