Description

1.	POWER WINDOW OPERATIOPN BY BUTTON The SIDE P/WMW BUTTON shall output signal to the 2 operations of the Manual UP/DOWN

2.	PASSIVE Operation OF MIRROR’S POSITION BY MANUAL SW (UP, DOWN, LEFT, RIGHT) THE RECEIPT FROM P/WDW MAIN SW WITH CAN COMMUNICATION

3.	THE MEMORY AND REMINDING Operation FOR POSITIONING THE MIRROR USING MEMORY SWITCH(FOR 2 PASSENGERS) THE RECEIPT FROM P/WDW MAIN SW WITH CAN COMMUNICATION

4.	RECEIPT BY CENTRAL DOOR LOCK/UNLOCK BUTTON Operation WITH CAN COMMUNICATION

5.	CONTAINMENT AND RETURN FUNCTION OF OUTSIDE MIRROR

Control Function

1.

POWER WINDOW CONTROL (1) POWER WINDOW OPERATING CONDITION A. POWER WINDOW LOCK SW(FROM DDM) OFF & POWER WINDOW TIMER(FROM BCM) ON or IGN2(ADM) ON (2) POWER WINDOW UP/DOWN OPERATING A. Receiving P/WDW UP/DOWN (FROM DDM or ADM itself) signal input under POWER WINDOW drive condition, Run assist's POWER WINDOW. Can not be outputed more than 15 seconds by same one-way only.

2.

OUTSIDE MIRROR ControlControl BY MANUAL SWITCH (1) ASSIST SIDE OUTSIDE MIRROR OPERATION A. The ACC ON state, if the mirror select switch in DDM is the RH state and the mirror direction switches (UP, DOWN, LEFT, and RIGHT) are operated, then the mirror motor shall be drive to control the mirror to the desired direction by receiving CAN msg. At this time, Up/Down direction conversion or Right/Left direction conversion, it have 100 ms Delay Times.

3.

OUTSIDE MIRROR MEMORY OPERATION BY MEMORY SWITCH (1) AFTER RECEPTION FROM THE P/WDW MAIN SW WITH CAN COMMUNICATION, MEMorIZE ASSIST SIDE O/S MIRROR position. Except, when the mirror manual switch at the RH is operated, the mirror position at RH shall not be memorized. (2) WHEN GETTING RID OF BATTERY, SAVE THE MIRROR positionposition MEMorIZED BY MEMORY SWITCH TO EEPROM.

4.

OUTSIDE MIRROR REMINDING OPERATION BY MEMORY SWITCH (1) Drive MIRROR reminding to position that is remembered if receive MIRROR reminding request (CAN) from DDM in IGN2 ON state. (2) Reminding operation of position that is not remembered is not operation. (3) It act reminding to position that is required lastly if it receive reminding request (FROM DDM) of different position during reminding operation. (4) Reminding prohibition condition A. INHIBIT "P" SW(FROM IMS) is OFF B. IGN2 OFF C. RH side MIRROR MANUAL SW's manufacturing (FROM DDM) is occured D. vehicle speed is more than 3 Km/h (FROM BCM)

5.

OUTSIDE MIRROR FAIL SAFE FUNCTION (1) If the sensor variation of 80㎷ and more is not occurred even there is an input variation from the position sensor when motor is driven, it shall be considered as occurring defects such as the harness disconnection, the motor failure, or the sensor malfunction so that the auto control operation should be quitted. (2) The mirror driving signal should not output over 15 seconds continuously. (Both the memory reminding and the manual switching operation) (3) Monitoring the Reminding Operation Time. If the reminding operation does not complete within 40 seconds after starting, the output of the mirror motor should be quitted and the reminding operation should be finished.

6.

OUTSIDE MIRROR DOWN OPERATION AT REVERSING (AUTO REVERS) NO Name Of Operation Power Select SW Shift Lever MIR Position Manual Control Result L R 1 Basic Operation IGN LH Not-R A POS. B POS. Shift lever Not-R→R MIR L:Auto reverse to (A-5°) POS. MIR R:Auto reverse to (B-5°) POS. 2 IGN RH Not-R A POS. B POS. Shift lever Not-R → R MIR L:No Change. MIR R:Auto reverse to (B-5°) POS. 3 IGN N Not-R A POS. B POS. Shift lever Not-R →R MIR L:No Change MIR R:No Change 4 Return after basic operation IGN LH R RESULT OF 1 RESULT OF 1 Shift lever R→ Not-R MIR L:Return to (A) position MIR R:Return to (B) position 5 IGN RH R A POS. RESULT OF 2 Shift lever R→Not-R MIR L:No Change MIR R:Return to (B) position 6 Mirror switch is operated during auto reverse IGN LH Not-R → R During FUNC. 1 During FUNC. 1 Mirror Switch Control MIR L:BY Mirror Switch Operation MIR R:Auto reverse to (B-5°) POS 7 IGN RH Not-R → R A POS. During FUNC. 2 Mirror Switch Control MIR L:No Change MIR R:BY Mirror Switch Operation 8 Receive return signal after mirror switch control during autoreverse IGN LH R Complete FUN.6 Complete FUN.6 Shift lever R→Not-R MIR L:Return to (A) position MIR R:Return to (B) position 9 IGN RH R A POS. Complete FUN.7 Shift lever R→Not-R MIR L:No Change MIR R:Return to (B) position 10 Mirror switch is operated during return to origin IGN LH R→ Not-R During FUNC. 4 During FUNC. 4 Mirror Switch Control MIR L:BY Mirror Switch Operation MIR R:Return to (B) position 11 IGN RH R→ Not-R A POS. During FUNC. 5 Mirror Switch Control MIR L:No Change MIR L:BY Mirror Switch Operation 12 Select switch is changed during auto reverse IGN LH Not-R → R During FUNC. 1 During FUNC. 1 Change select switch to N MIR L:Return to (A) position AFTER 500ms MIR R:Return to (B) position AFTER 500ms 13 IGN LH Not-R → R During FUNC. 1 During FUNC. 1 Select Switch LH→N(Within 500ms)→RH MIR L:Auto reverse to (A-5°) POS. MIR R:Auto reverse to (B-5°) POS. 14 IGN LH Not-R → R During FUNC. 1 During FUNC. 1 Select Switch LH→N(After 500ms)→RH MIR L:Return to (A) position MIR R:Auto reverse to (B-5°) POS 15 IGN RH Not-R → R A POS. During FUNC. 2 Change select switch to N MIR L:No Change MIR R:Return to (B) position AFTER 500ms 16 IGN RH Not-R → R A POS. During FUNC. 2 Select Switch RH→N→LH MIR L:Auto reverse to (A-5°) POS. MIR R:Auto reverse to (B-5°) POS. 17 IGN N Not-R → R A POS. B POS. Select Switch N→LH MIR L:Auto reverse to (A-5°) POS. MIR R:Auto reverse to (B-5°) POS. 18 IGN N Not-R → R A POS. B POS. Select Switch N→LH MIR L:No Change MIR R:Auto reverse to (B-5°) POS 19 IGN off during auto reverse IGN LH Not-R → R During FUNC. 1 During FUNC. 1 IGN→ACC or B+ MIR L:Return to (A) position MIR R:Return to (B) position 20 IGN RH Not-R → R A POS. During FUNC. 2 IGN→ACC or B+ MIR L:No Change MIR R:Return to (B) position 21 IGN off after completing auto reverse IGN LH Not-R → R Complete FUN.1 Complete FUN.1 IGN→ACC or B+ MIR L:Return to (A) position MIR R:Return to (B) position 22 IGN RH Not-R → R A POS. Complete FUN.2 IGN→ACC or B+ MIR L:No Change MIR R:Return to (B) position 23 IGN off during return to origin IGN LH R → Not-R During FUNC. 4 During FUNC. 4 IGN→ACC or B+ MIR L:Return to (A) position MIR R:Return to (B) position 24 IGN RH R → Not-R A POS. During FUNC. 5 IGN→ACC or B+ MIR L:No Change MIR R:Return to (B) position 25 IGN is on during return to origin by being off of IGN IGN→ACC or B+ LH R During FUNC. 23 During FUNC. 23 (Shift lever R→Not-R) and next (ACC or B+→IGN) MIR L:Return to (A) position MIR R:Return to (B) position 26 IGN→ACC or B+ LH R During FUNC. 23 During FUNC. 23 ACC or B+ →IGN MIR L:Auto reverse to (A-5°) POS. MIR R:Auto reverse to (B-5°) POS. 27 IGN→ACC or B+ RH R A POS. During FUNC. 24 (Shift lever R→Not-R) and next (ACC or B+→IGN) MIR L:No Change MIR R:Return to (B) position 28 IGN→ACC or B+ RH R A POS. During FUNC. 24 ACC or B+ →IGN MIR L:No Change MIR R:Auto reverse to (B-5°) POS. 29 In case of IMS-position switch input during mirror reverse operation, if in inhibit condition then operating the return acts else in play back condition then replay acts. 30 The position A,B of mirror is operated by mirror switch or by IMS memorized. 31 If the current position of mirror is different from memorized A,B in clause 30 when IGN ON→OFF, it's recovered to MIR L:(A).R:(B) position. 32 IGN on status, if the current position of mirror is different from memorized A,B in clause 30 when mirror select SW is changed to LH→N or RH→N, it's recovered to MIR L:(A).R:(B) position. 33 In case of changing 'R' '0' → '1', operation is done after 350 ± 50 msec.